Make 2 copies of
your pattern
and choose your glass.
Cut one copy of your
pattern out and glue it to your glass - leave
the other copy whole as a reference.
Cut out your glass
pieces.
Grind your glass
into shape.
Clean off and lay
out your glass face up.
Use mosaic mount or
clear contact paper with adhesive back to stick
on top of your glass.
Greece your mold
with Vaseline or "Goose Juice" so that the
hardened concrete will slide out. Put your glass
in with the contact paper on the bottom and the
glass on the top.
The mortar mix or
sand mix should be the first 1/3rd layer.
The concrete should
fill the mold to the top and be the last 2/3rds
layer.
After about 2 days,
carefully flip the mold over and let the stone
slide out.
Peel off the
contact paper and clean off any extra mortar
with a plastic scratchy pad and water.
The stone should be
thoroughly dry after 60 days and can then be
sealed all over with concrete water seal.
Make 2
copies of your pattern
and choose your glass.
Cut one
copy of your pattern out and glue it to your glass -
leave the other copy whole as a reference.
Cut out
your glass pieces.
Grind
your glass into shape.
Clean
off and lay out your glass face up.
Use
mosaic mount or clear contact paper with adhesive back
to stick on top of your glass.
Greece
your mold with Vaseline or "Goose Juice" so that the
hardened concrete will slide out. Put your glass in with
the contact paper on the bottom and the glass on the
top.
The
mortar mix or sand mix should be the first 1/3rd layer.
The
concrete should fill the mold to the top and be the last
2/3rds layer.
After
about 2 days, carefully flip the mold over and let the
stone slide out.
Peel
off the contact paper and clean off any extra mortar
with a plastic scratchy pad and water.
The
stone should be thoroughly dry after 60 days and can
then be sealed all over with concrete water seal.
